Solid-Stage optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patent pending non-mechanical proprietary configurations and activated via an electrical control signal. The solid-state operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The SW fiberoptic switches are true switching solutions for optical networking applications.
-Solid-State Optical Switch (Module)-
| Features |
| Fast Switching Speed |
| Ultra-High Reliability |
| High Repeatability |
| Low Cost |
| Latching |
| Applications |
| Optical Signal Routing |
| Network Test Systems |
| Instrumentation |
| Optical Network Protection/Restoration |
| Configurable Optical Add/Drop |
| Transmitter and Receiver Protection |
 |
| Specifications (Solid State Optical Switch) |
| (1x2) Solid-Stage Optical Switch |
| Parameter | Value |
Units |
Datasheet | |
| Operating Wavelength | 1550 +/- 50 |
nm |
|
|
| Insertion Loss | Max. | 1.0 |
dB |
|
| Typ. | 0.7 | |||
| Polarization Dependent Loss (WDL) | <= 0.1 | dB | ||
| Polarization Mode Dispersion | <= 0.1 |
ps |
||
| Cross Talk | >= 50 |
dB |
||
| Return Loss | >= 55 |
dB |
||
| Switching Speed | Max. | 200 |
us |
|
| Typ. | 50 | |||
| Drive Voltage | 5 |
V |
||
| Operating Temperature | 0 ~ +70 |
ºC |
||
| Dimension | 66.8 x 7.8 x 7.8 | mm | ||
|
| Ordering Codes |
OLSW - SS - [Type] - [Model] - [Wavelength] - [Fiber Diameter] - [Fiber Length] - [Connector Type] |
| Type | Code | Model | Code | Wavelength | Code | Fiber Diameter | Code | Fiber Length | Code | Connector Type | Code |
| Module | - |
1x2 |
12 |
1550nm |
155 | 250um Bare Fiber | 1 | 1m | 1 |
No Connector |
NC |
| 900um Loose Tube | 2 | 2m | 2 |
FC/APC |
FA |
||||||
FC/PC |
FP |
||||||||||
FC/UPC |
FU |
||||||||||
SC/APC |
SA |
||||||||||
SC/PC |
SP |
||||||||||
ST/UPC |
ST |
||||||||||
SC/UPC |
SU |
||||||||||
LC/PC |
LP |
||||||||||
LC/UPC |
LU |
||||||||||
MU/PC |
MP |
||||||||||
| * Opto-Link Corporation Ltd reserves the right to make changes to the Solid State Optical Switch without notice. | |
